
May 2026
To be honest I just built this one to get it ticked off. I’m trying to build all the 1920s/30s Super Models, and this is one of them – number 25. It’s just not that super. It’s based on a hydraulic-powered crane, but doesn’t really convince as that, since there’s little sign of hydraulics, or anything looking like them. The prototype runs on rails, but the model won’t, as there’s no flanges to the wheels. And it’s not very big and not very complicated. It did, however, win a prize in a Meccano competition, and appeared on the front of Meccano Magazine in the January/February 1921 issue.
I didn’t have any problems with the build really. There are a few things missing from the parts list, as usual, of course. You need a couple of 3/8″ bolts to attach bush wheel 8 (fig. 3) to the cranks 7, and careful adjustment is needed to get the friction on the screwed rods down to a reasonable level. You need a 1″ sprocket, and two 1″ rods. And Fig. 2 shows a 3″ strip vertically at each corner, whereas the parts list seems to assume that two of them are 2 1/2″ strips. Either works though. I also used 6 1/2″ rods for the axles instead of 8″ rods – it looks better that way.
This simple model was included with the old Outfit 7, but wasn’t in Outfit 6. I can’t see why not – the only extra parts needed were two 5″ screwed rods and a third threaded pin. 4 1/2″ screwed rods would work just as well, and they were in Outfit 6. And a long bolt would have substituted for one of the threaded pins. I guess we’ll never know…
