
July 2026
This is a model from the 1955 Meccano Instructions booklet for outfits 7 and 8. It’s numbered 8.19 in the booklet, and is titled ‘Eight-Wheeler Lorry’, but there can be little doubt that the prototype was a 1950s Foden lorry used for delivering barrels to pubs. Here’s a similar Foden cab:

The model is built using my 1970s blue/yellow Meccano, and is pretty much as the instructions given in the booklet. There’s no suspension or cab floor, but that’s fair enough for an outfit 8 model I think. It looks pretty good, particularly once loaded up with tonic water. That won’t go to waste: I’ve got the gin to go with it.
The build was a bit fiddly in places. There are so many nuts inside the cab with no easy access to get your fingers or spanner in, whichever order you put the thing together. And the two front axles are 3 3/4″ apart, and as specified the rear of the two is significantly lower then the other 3 axles. This took a bit of sorting out. The latter issue I resolved by:
(1) I used 1″ by 1/2″ angle brackets to mount the axle rather than the 1″ by 1″ brackets, to take advantage of the long hole in the smaller brackets. I suspect this was the original intention and the text is incorrect, as the smaller brackets are on the parts list anyway.
(2) I also added a couple of washers to each of the double brackets, raising the axle up a bit more.
As for the non-standard distance between the axles, this matters because the steering needs a strip 3 3/4″ long between holes to keep the angles of the two sets of wheels synchronised. The leaflet does this with a 2 1/2″ strip and three fishplates bolted end to end, but this is just asking for trouble. They’ll just keep coming loose. Instead I used a 3 1/2″ strip, a 5-hole 2″ strip and a 2″ perforated slotted strip, which gave me a strip with holes the right distance apart that wouldn’t bend on me.
